home • contact • thpinfo.com
2004 / FunkyMD - MiniDisc titling with Linux
This project provides tools for titling, recording and editing MiniDiscs using a portable Sony minidisc recorder and a self-made interface for the parallel port. FunkyMD is currently maintained by Thomas Perl and was inspired by Lionel Pawlowski's MDCOM interface. FunkyMD is based on MDECK, the original MS-DOS utility for controlling the MDCOM interface. You can find a MDECK binary and the source here.
FunkyMD is now in a usable state, it has good titling capabilities and also has the ability to record audio files to MiniDisc plus titling! Scheduling some recording and recording songs from MiniDisc to your computer is also possible. (SF.net Project page)
I've uploaded some photos of the Parallel port interface hardware, of the remote connector and the board in detail to PicasaWeb. You can find all photos here: FunkyMD on PicasaWeb
The latest version is always available via subversion at https://funkymd.svn.sourceforge.net/svnroot/funkymd/trunk.
https://funkymd.svn.sourceforge.net/svnroot/funkymd/trunk
FunkyMD is based on my MDECK utility for MS-DOS, which was the first attempt at controlling the interface through the parallel port. You can now download the MDECK source code here: mdeck.zip.
A pre-compiled binary for DOS can be found here: mdeck-bin.zip.
This new release does not add any new features, but makes FunkyMD compilable on newer systems, because the header files have changed a bit (asm/io.h and sys/io.h). This release has also been tested on an MZ-R70 and has been successfully used to title MDs, so the code still works on newer machines with parallel ports.
To get the best possible titling results, use a battery in your MD player and disconnect both headphones and the AC power. This way, there is no interference, and titling works without problems. If you have headphones or AC power plugged in, there might be some problems with titling accuracy.
There has not been any update for about a year now, and I'm happily using an iPod mini for all my portable music needs. I have, however, added some improvements during the last year that were not published yet, so I thought I'd roll another release and move the codebase to SourceForge's SVN services. Changes since 0.4 include: readline support, refactoring.
This release should be helpful for people that already own a MiniDisc recorder and the interface (or are ready to build it), but I can just recommend other MP3/OGG players to everyone else (if all you want to do is just listen to music, it's a different story for recording, though).
FunkyMD 0.4 has been released, and some minor bugs have been fixed. You can read about the changes here: FunkyMD 0.4 release notes. I've tested this release with a Sony MZ-R70 and it works well so far. This release also has got the gFunkyMD (Java-based GUI) removed, because it was old and unmaintained. Hope you're having fun with this release and maybe there's something FunkyMD-related coming sometime in the future. For now, this is the latest stable release, and the first release since 2004. Enjoy.
I've got an Apple iPod for about a year now, because my MZR-900 doesn't want to write data to my minidiscs anymore (write head malfunctioning), so I've not made progress on improving FunkyMD. I'm planning to document FunkyMD source better and maybe I'll get my hands on a minidisc recorder again in the future.
Unfortunately, the new HiMD technology seems crappy for it doesn't allow us to access our music and recordings from inside Linux. Having minidisc (and HiMD) technology in Linux would be wonderful, but it's not the way it is, and so it's better to stay with the iPod, which is very well supported under Linux and doesn't lock your music. Too bad you can't record audio on an iPod mini..
The most important part of FunkyMD is the hardware interface, which connects the computer's parallel port to the wire remote port on your portable Sony minidisc recorder. As you see, I've put my hardware interface into a small semi-transparent red box, which makes it look quite nice on my desk.
Build the interface, put it in a small box, connect it and finally title your discs..
It's quite easy to build the hardware interface yourself. Just take a look at the following site which provides a guide on how to build your own interface. I won't go into describing the whole process again, as I've followed these instructions for my interface too.
MDCOM building instructions can be found here: l.pawlowski.free.fr/mdcom
*) FunkyMD is known to work with Sony MZR-900 and MZR-70, but should work with others too.
The tools included with the funkymd package are shell scripts which communicate with sox and funkymd to do certain tasks for your MDs. This could be easily extended, as it is not hard to do these tasks with the help of funkymd.
By hooking up the line out of your MiniDisc recorder to the line-in (or mic-in) of your soundcard, you can easily transfer audio data from your MiniDisc recorder to your computer. md2file makes it easy to synchronize the start of the recording by starting playback and recording together. You can later edit the recording using (for example) wavbreaker.
This is probably the most-used funkymd tool around (it surely was for me). You specify audio files (OGGs, MP3s, WAVs and all that sox can handle) and mdrecord will take care of recording and titling all the tracks - just hook up the line-out (or spk-out) of your soundcard to the line-in of your MiniDisc recorder and get going :)
mdschedule can be thought of as a recording timer for your MiniDisc recorder. All it does is sitting there and waiting for some time to come - the time you specified on the command line. This is useful for recording a radio show (stereo receiver line-out goes to minidisc recorder line-in) at some time where you cannot start the recording manually. I used this to record a radio show at 22.00 on Saturdays, when I am usually not at home.
mdtitle is used when you have an already recorded Minidisc, and now want to title it using funkymd. You just give the disc name as first parameter and a file as second which will be read for track titles: every line contains a title of a track. Titling is fully automatic.
There are quite a few other sites related to either MiniDisc or MiniDisc titling/editing under Linux.
